DF-Series

Yes, because according to the current state of knowledge the coronavirus has a size of max. 20-160nm and is therefore larger than laser particles (>=10nm), for which our systems are currently mainly used. TBH filter and extraction systems can effectively extract coronaviruses and filter them out of the air. This prevents the viruses from spreading through the air and settling on surfaces through which people can be indirectly infected with the SARS-CoV-2 virus.

H13 filters from TBH are tested in accordance with DIN EN 1822 and therefore offer safe quality. They filter 99.95% of all harmful particles (0.1-0.3µm), including coronaviruses. In comparison, a mask of class FFP3, in accordance with DIN EN 149, only retains 98% * of these particles (0.6µm). The DGUV recommends using an extraction for personal protection before wearing suitable protective equipment. H13 filters offer sufficient protection. They have lower pressure loss,  compared to the H14 filter, and thus a better energy balance as well as a longer service life.

*Quelle: Berner Safety

Yes. The 99.95% separation efficiency in H13 filters relates to particles of the "most penetrating particle size" (short MPPS, or in German "most penetrating particle size"). These are particles, sizes between 0.1-0.3 µm, represent, the so-called “worst case” for the filter's separation efficiency. Particles that are outside this spectrum, i.e. larger or smaller, are 100% captured by the filters due to various physical effects (according to EN1822).

In general, filters are changed according to the filter status indicators on the system.

The following recommendation also applies to filter and extraction systems used in medicine, aesthetics and dental, regardless of the filter status display:

The exchange takes place regardless of the filter status display for the following reasons:

Possible contamination of filter with viruses and the growth of fungi and bacteria on the surface. Biological contamination cannot be monitored via the filter display.

Saturation of the activated carbon with process gases and their aging (even with a low pollutant content). This cannot be monitored via the filter display.

When changing filters, do that in a separate room, wearing adequate PPE. Use a disposable pad when changing the filter. Put the used filter into the airtight transparent bag, which is included in the system`s delivery, and seal it.

TBH filter and extraction systems are not a medical device in accordance with §3 Art. 1 of the MPG (German Medical Products Law), because the systems do not come in contact with the patient. The systems extract the particles safely from the ambient air and serve primarily the occupational safety than patient’s safety. The systems have no therapeutically use. Therefore, they do not need a medical approval according to the European standard DIN EN 60601-1.

Yes, we have prapared a flyer for you. This TBH Corona protection PDF contains all information shown on this site. 

The extraction arms can be easily disassembled and then placed in a tub with disinfectant cleaning solution (observe the manufacturer's instructions). After a short exposure time, clean the arms with a nylon brush and then disinfect them (scrub disinfectant).

The system is delivered ready for use. After installing the extraction arm, the system is ready for operation.

Filter service lives are very dependent on the application and therefore, cannot be predicted generally. Normally, the change takes place according to the filter status display. In medicine / dental / aesthetics applications, the filters have to be changed at least every ½-year due to the bacteria / nucleation.

U15 filters (degree of separation 99.9995) have a 3-time pressure loss compared to H13 filters (degree of separation 99.95), which leads to a weaker extraction capacity of the system. Much more important than two decimal places in the degree of separation is to capture the aerosols / particles at the point of origin, for which an appropriate extraction power is required. A H13 filter guarantees more safety and efficiency against viruses, bacteria and aerosols over a longer time than a U15 filter.

In addition to the filter performance, the most important thing for the efficiency of an extraction system is correct capturing at the point of origin. If it is too far from the source of aerosol formation, a high degree of separation will not help either. This process is comparable to a sieve that can only filter what goes through and not what passes it. It makes no difference whether a UV-C light lamp or another antimicrobial device is used additionally to extraction. TBH filter and extraction systems have a H13 filter that captures 99.95% of the hard-to-separate particles in the spectrum 0.1µm - 0.3µm, as well as 100% of larger and smaller particles. Therefore, they already offer the best possible protection - not only against particles but also against viruses and bacteria.

UV-C light lamps in addition to extraction systems with TBH filters are not necessary. Correct capturing is crucial for efficient extraction.