Respiratory protective mask
Protects against drops in the exhaled air of the person wearing the mask; however, it does not reliably protect against viruses and bacteria
Protects the person wearing the mask from inhaling the smallest airborne particles, filtrates at least 78% of viruses or bacteria from the air breathed by the wearing person
Protects against viruses and bacteria in the room air, filtrates them up to 99.95%
For medical and nursing staff to protect patients from respiratory emissions
Without exhalation valve: for medical and nursing staff, rescue and emergency services to protect against transmission of viruses/bacteria
With exhalation valve: for non-medical use to protect against aerosols containing viruses/bacteria
For protection against persons in waiting or treatment rooms, offices, public facilities;
Is no medical device according to §3 Art. 1 of the MPG
Protection of other persons, if one’s infected
Use of mask only after instruction, otherwise no sufficient protective effect
greatly reduces the number of particles (=viruses, bacteria) in the room due to 4-times room air change and H13 filter
Period of usage
Have to be disposed after each use
Depending on classification up to 8 hours or suitable for reuse
System for continuous operation, filter change after status display
According to EN 14683, standard for "Surgical masks" by the manufacturer
According to EN 149, standard for "Particle filtering half masks" by independent testing body
According to EN 1822, standard for "HEPA filters with very high efficiency (EPA, HEPA, ULPA)" by the manufacturer
Source: PM DGUV: “Mund-Nase-Schutz ist keine Atemschutzmaske” vom 27.03.2020 (“Mouth-Nose-Protection is not a respiratory protective mask” from March 27, 2020)
According to studies, coronaviruses can remain in the air for several hours. Air filtration helps to reduce the number of viruses in the air significantly. For this purpose, it's important to keep an air exchange rate in the room of around 4.
During laser therapies, in laser eye surgeries and in various laser treatments, harmful particles are produced. These have to be extracted in combination with the coronaviruses. This is the only way to efficiently protect doctors, nursing staff and patients. Only the use of a filter and extraction system can guarantee this.
These filter and extraction systems are suitable for extracting coronaviruses as well as other viruses and bacteria from the ambient air in a treatment or patient's room.
If you have highly contaminated or large room, please contact our TBH sales team. Together we can work on a indiviual solution for you.
MPPS = most penetrating particle size
Coronaviruses have a size of 20 - 160nm, which is 0.02 -0.16µm. Our systems extract and separate all particles <0.1µm and >0,3µm to 100% effectively, and hardly separable particles in between to 99.95%. Smaller particles remain in the filter because of gravitational force.
Coronaviruses are easy to extract for this system. The integrated TBH H13 filters are tested in accordance with EN1822 criteria and their effectiveness in accordance with ISO 15012-1. High safety requirements are thus met. Awarded W3 and the DGUV seal, TBH filter and extraction systems offer triple protection for humans, environment and machinery and is accordingly listed on the "IFA positive list". TBH is specialized in laser dusts with a confirmed separation efficiency of up to 1nm in laser processes.
H13 filter = 99.95 % separation efficiency
Influences on degree of separation
Larger filter surface
Longer contact times
Reducing volume flow.
Criteria in accordance with EN 1822
Approved efficiency in accordance with ISO 15012-1
Place the extraction system or the detection element as close as possible to the patient or the treatment site.
If possible, place guiding elements such as Plexiglas panels or walls to limit the extracting area.
Use adequate PPE to change filters.
If possible, change the filters in a separate room.
Use a disposable pad when changing the filter.
Immediately, pack the used filter in a sealable packaging, such as a plastic bag, and seal it.
Have suitable practice and hospital standard cleaning agents available for cleaning the extraction system and the surrounding area.
Yes, because according to the current state of knowledge the coronavirus has a size of max. 20-160nm and is therefore larger than laser particles (>=10nm), for which our systems are currently mainly used. TBH filter and extraction systems can effectively extract coronaviruses and filter them out of the air. This prevents the viruses from spreading through the air and settling on surfaces through which people can be indirectly infected with the SARS-CoV-2 virus.
H13 filters from TBH are tested in accordance with DIN EN 1822 and therefore offer safe quality. They filter 99.95% of all harmful particles (0.1-0.3µm), including coronaviruses. In comparison, a mask of class FFP3, in accordance with DIN EN 149, only retains 98% * of these particles (0.6µm). The DGUV recommends using an extraction for personal protection before wearing suitable protective equipment. H13 filters offer sufficient protection. They have lower pressure loss, compared to the H14 filter, and thus a better energy balance as well as a longer service life.
Yes. The 99.95% separation efficiency in H13 filters relates to particles of the "most penetrating particle size" (short MPPS, or in German "most penetrating particle size"). These are particles, sizes between 0.1-0.3 µm, represent, the so-called “worst case” for the filter's separation efficiency. Particles that are outside this spectrum, i.e. larger or smaller, are 100% captured by the filters due to various physical effects (according to EN1822).
When changing filters, do that in a separate room, wearing adequate PPE. Use a disposable pad when changing the filter. Put the used filter into the airtight transparent bag, which is included in the system`s delivery, and seal it.
In general, filters are changed according to the filter status indicators on the system.
The following recommendation also applies to filter and extraction systems used in medicine, aesthetics and dental, regardless of the filter status display:
Replace pre filter mat
Replace main filter
The exchange takes place regardless of the filter status display for the following reasons:
Possible contamination of filter with viruses and the growth of fungi and bacteria on the surface. Biological contamination cannot be monitored via the filter display.
Saturation of the activated carbon with process gases and their aging (even with a low pollutant content). This cannot be monitored via the filter display.
TBH filter and extraction systems are not a medical device in accordance with §3 Art. 1 of the MPG (German Medical Products Law), because the systems do not come in contact with the patient. The systems extract the particles safely from the ambient air and serve primarily the occupational safety than patient’s safety. The systems have no therapeutically use. Therefore, they do not need a medical approval according to the European standard DIN EN 60601-1.
Monday - Thursday 08:00 - 17:00 h
Friday 08:00 - 14:00 h
Do you have questions regarding our products, services or company?
Please feel free to contact us at any time: just use the contact information below or send us your request via the contact form!
Telephone: +49 7082 9473-0
Telefax: +49 7082 9473-20
TBH® GmbH - Absaugtechnik, Filtertechnik, Umwelttechnik
You tell us what you need, and we will design a system individually to your requirements and give you a special offer.
Do you need a new filter? Click on the link below to access the request form in case you have questions about a replacement filter.
Filter and extraction systems deal with a topic that is important for everyone, but can also cause confusion. Therefore, we have created a list of the most frequently asked questions exclusively for you.
Since there are many terms on our website, which may not be commonly known by everyone, we created this list of the most used words in filter and extraction technology, and their respective explanations.
Our systems are for your protection. We take care of your health, the environment and longer machine running times. Find out the reasons why filter and extraction systems are so important .