• fileadmin/content/_Products/TFS-Series/TFS-series.jpg

    The TFS-series is the result of intensive development efforts and is used either in laser marking or in laser engraving applications but also in other applications with medium / high dust content. The systems are characterized by their large filter surface and its intelligent system design.

  • fileadmin/content/_Products/GL-Series/GL-Series_s.jpg

    The GL series devices can, according to the respective application, be equipped with different filter modules to provide for the best possible adaptation to a wide variety of applications. This leads to an optimization of filter costs and maintenance efforts. Additionally, it is possible to change the device's filter equipment later in case of an application change. Different pre-filters and the so-...

  • fileadmin/content/_Products/BF-Series/BF-series.jpg

    The products of the BF series (Basic Filtration) were specially designed as basic models and include all of the essential functions of an extraction and filter system, combined with an excellent price-performance ratio.

    The devices are available with different motor concepts, filter equipment and operating options. The TBH...

  • fileadmin/content/_Products/LN200-Series/LN200-Series_s.jpg

    The devices in the LN 200-series feature a compact, modular design which allows simple adjustment of the filter configuration for individual applications. Thanks to the special high-power turbine, the units can be arranged in decentralised positions and extract reliably even over long distances.

  • fileadmin/content/_Products/LN600-Serie/LN600-Series_s.jpg

    The devices in the LN 600 series feature a large filter area, providing a long service life. They can be equipped with different filters at the factory to meet individual application requirements. The special high-power blower gives the systems a high effective air flow rate, allowing them to be used in decentralised positions for multi-site extraction.

  • fileadmin/content/_Products/FP150/FP150_s.jpg

    The FP 150 is equipped with a cleanable filter cartridge which allows dust build-up to be removed from the filter using bursts of compressed air. This means that the device is ideal for applications in which large amounts of dry dust are extracted, and that it has a very long service life in comparison to systems with saturation filters. Precoating (applying a separating layer to the filter...

  • fileadmin/content/_Products/FP150_ATEX/FP_150_ATEX.jpg

    The FP 150 ATEX is equipped with a cleanable anti-static filter cartridge which allows dust build-up to be removed from the filter using bursts of compressed air. This means that the device is ideal for applications in which large amounts of dry, flammable dust with a minimum ignition energy of > 3 mJ are extracted, and that it has a very long service life in comparison to...

  • fileadmin/content/_Products/FP200-Serie/FP-Series_s.jpg

    The FP 211 and FP 213 systems are equipped with cleanable filter cartridges which allow dust build-up to be removed from the filters using bursts of compressed air. This means that these devices are ideal for applications in which large amounts of dry dust are extracted, and that they have very long service lives in comparison to systems with saturation filters...

  • fileadmin/content/_Products/FP200_ATEX-Serie/FP200_ATEX-Series_s.jpg

    The FP 211 ATEX and FP 213 ATEX systems are equipped with cleanable anti-static filter cartridges which allow dust build-up to be removed from the filters using bursts of compressed air. This means that these devices are ideal for applications in which large amounts of dry, flammable dust with a minimum ignition energy of > 3 mJ are extracted, and that they have a very long...

  • fileadmin/content/_Products/FPV100/FPV100_s.jpg

    The FPV 100 (filter cartridge pre-separator) is equipped with a cleanable filter cartridge which allows dust build-up to be removed from the filter through a rotary motion. The device is installed upstream of a TBH extraction system from the LN/GL series and is ideal for applications in which large amounts of dry dust have to be extracted. The combination of FPV 100 with a...

  • fileadmin/content/_Products/FPV202/FPV202.jpg

    The FPV 202 filter cartridge pre-separator was specially designed to significantly extend the service life of a downstream extraction and filter system of the LN/GL series. The system is equipped with cleanable filter cartridges which allow dust build-up to be removed from the filter using bursts of compressed air. The device is therefore particularly suitable for applications in which...

  • fileadmin/content/_Products/DT100_DT150/Absaugkabinett_downdraft_table_s.jpg

    The downdraft table DT100/DT150 was specially designed for use in laboratories and workshops. It can be used wherever painting (e.g. spot repair), gluing (solvents) or decanting takes place. The downdraft table was designed as a base unit to which different hoods can be attached. The DT150 was specially designed according to ATEX principles and is suitable for zones 22 (dust) and 2 (gas).

  • fileadmin/content/_Products/CR-Series/CR-Series_s.jpg

    Ever greater quality requirements, the increasing miniaturisation of components and products and increasingly complex production processes have driven the development of clean room technology. The new TBH-CR series is the perfect addition to your clean room technology...

  • fileadmin/content/_Products/GL_DESK-Serie__US_/GL_DESK-Series_s.jpg

    The units in the GL Desk-Series were specially designed as base units for compact lasers. They allow space-saving positioning of the laser and extraction and filter system and eliminate the need for an extra work bench. Together with the GL series, they were designed as particularly environmentally friendly extraction and filter systems, reflecting the requirements of TBH GmbH as...

  • fileadmin/content/_Products/OEN-Serie/OEN-Series_s.jpg

    The systems of the OEN series were specially designed for the extraction of oil and emulsion mist. They are used wherever there is a need for extraction at industrial baths or in the metalworking industry. Depending on the application, you can use various filter configurations that allow for extraction of pure oil/emulsion mist or a combined extraction with particles.

  • fileadmin/content/_Products/Dental/Dental_s.jpg

    TBH GmbH offers a special product range for the wide variety of dental applications. The systems were developed for the ceramic, plastic and metal dusts with particles from 0.5 to 10µm that are created by dental milling, grinding and laser welding processes.

    Depending on the specific application and require...

  • fileadmin/content/_Products/Medical/Medical_s.jpg

    Protect yourself, your staff, and your patients with TBH Extraction- and Filtration Systems. In the laser surgery aerosols will be generated with a particle size of 0,1µ - 2µm. Those laser aerosols (LGAC = Laser Generated Air- boune Contaminants) consist of serveral parts of human fabric.  This one being removed from the fabric explosively as a steam or gas mixture. Dangers start out...

  • fileadmin/content/_Products/Accessories/Accessories_s.jpg

    We offer a variety of different accessories for our units